Feilsøking audi a6 2.4

audi a6 bergen · Juni 14, 2014

Hei har nettopp fått feilsøkt bilen min er det noen som kan hjelpe meg og tyde feilsøkingen ?

kjetil1972 · Juni 14, 2014

P0021 Audi P0021 Audi - 'A' Camshaft Position Timing Over-Advanced Or System Performance Bank 2

0

| Add Comment

Possible causes

- Dirty engine oil

- Low engine oil level

- Faulty camshaft actuator

- Camshaft actuator circuit open or shorted

- Camshaft actuator circuit poor electrical connection

What does this mean?

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

- Lack/Loss of power

- Engine rough idle

Read more: http://engine-codes.com/p0021_audi.html#ixzz34eKkmDlM

P0411 Audi P0411 Audi - Secondary Air Injection System Incorrect Flow Detected

| Add Comment

Possible causes

- Faulty Vacuum hoses damaged

- Faulty Air Pump inoperative

- Air bypass solenoid harness is open or shorted

- Air bypass solenoid circuit poor electrical connection

- Air bypass solenoid leaking/blocked or stuck open/closed

- Air diverter valve leaking/blocked or stuck open/closed

What does this mean?

When is the code detected?

The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

- Engine hesitation

P0411 Audi Description

An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.

Read more: http://engine-codes.com/p0411_audi.html#ixzz34eLzxTg1

P0010 Audi P0010 Audi - 'A' Camshaft Position Actuator Circuit Bank 1

| Add Comment

Possible causes

- Dirty engine oil

- Camshaft Position Actuator Circuit is open or shorted

- Camshaft Position Actuator Circuit poor electrical connection

- Faulty Camshaft Actuator

What does this mean?

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

Read more: http://engine-codes.com/p0010_audi.html#ixzz34eMQ7iWv